• All-in-one unit, pre-assembled with a back can and mounted transformer
• Features a quick flip 70 or 25 Volt selector switch and an easy select transformer wattage dial featuring the choice of 8 or 9 individual wattage tap settings covering your complete range of needs
• Flame-retardant, ABS unit also comes with insulated wires, has an attached metal safety loop and easy mount tabs for securing the unit
• Ideal all purpose, value sound solution covering a wide range of applications in commercial sound
• With a furnished 8 ohm tap selector, the speaker can be kept readily on hand to meet all your unexpected sound installation needs

• All-in-one unit, pre-assembled with a back can and mounted transformer
• Features a quick flip 70 or 25 Volt selector switch and an easy select transformer wattage dial featuring the choice of 8 or 9 individual wattage tap settings covering your complete range of needs
• Flame-retardant, ABS unit also comes with insulated wires, has an attached metal safety loop and easy mount tabs for securing the unit
• Ideal all purpose, value sound solution covering a wide range of applications in commercial sound
• Furnished 8 ohm tap selector, the speaker can be kept readily on hand to meet all your unexpected sound installation needs

• 6.5" Polypropylene Woofer w/ Rubber Surround
• 3/4" Silk Dome Tweeter
• Frequency Response: 60Hz to 20kHz
• Sensitivity: 87db 1w/1m
• Impedance: 8 Ohms
• Max Power Handling: 80 Watts
• Transformer: 70V Transformer Switch
• Transformer Settings: 30W, 15W, 7.5W, 3.7W & 1.9W
• Dimensions: 10.25" Diameter x 7.75" Depth
• Cut-Out Dimensions: 8.75" Diameter
• Quick-Snap Terminal Connections
• Mounting Brackets Included
• Metal Safety Loop for Securing

• Superior sound in a very compact enclosure
• Wide-dispersion coaxial driver for broad, even coverage; superb off-axis response
• Small footprint, visually appealing
• Only 7-1/4" face diameter
• Installs in wide range of ceiling types
• For 70V and low-impedance systems
• Selectable power taps via front-mounted control (under grille); 16, 8, 4, 2, 1 watts at 70V
• 16-ohm Input setting for low-impedance systems (Selectable via front-mounted control, under grille)
• Quick wiring with removable plug-in connector
• Plug-in connector provides loop-through terminals for next speaker
• Terminal cover provides knockout for flexible conduit connection
• Compounded rubber surround for lasting performance year after year
• Integral mounting clamps tighten quickly and firmly
• Attachment point for seismic safety cable
• Off-white textured finish easily painted to match room decor
• Available accessories: Tile Bridge Support (TBSF), Safety Cable (CK10), both sold separately

• Wide-dispersion coaxial driver for broad, even coverage
• Good off-axis response with smooth contouring
• Computer-matched venting system for full bass output
• Large back can for deeper bass response
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• Power taps (in watts): 32, 16, 8, 4, 2, and 1 for 70V; 32, 16, 8, 4, and 2 for 100V
• 16-ohm input for non-transformer, multi-speaker systems (selectable via tap selector switch)
• Compounded rubber surround, plus polypropylene and polycarbonate drivers for lasting performance
• Easy wiring with plug-in connector
• Integral swing-out clamps for easy installation
• Connector provides loop-through terminals for the next speaker
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet provides protection for connections
• Off-white textured finish easily painted to match theme decor
• Attractive, contemporary, sturdy steel grille assembly with fine perforations
• Listed to UL Standard 60065 for US and Canada
• Independently tested and meets requirements of UL-2043 (report available)
• Accessory tile bridge support ring (Model TBCR, sold separately)
• Accessory 10-foot long cable kit (Model CK10, sold separately)

• Wide-dispersion coaxial driver for broad, even coverage
• Good off-axis response with smooth contouring
• Computer-matched venting system for full bass output
• Large back can for deeper bass response
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• Power taps (in watts): 32, 16, 8, 4, 2, and 1 for 70V; 32, 16, 8, 4, and 2 for 100V
• 16-ohm input for non-transformer, multi-speaker systems (selectable via tap selector switch)
• Compounded rubber surround, plus polypropylene and polycarbonate drivers for lasting performance
• Easy wiring with plug-in connector
• Integral swing-out clamps for easy installation
• Connector provides loop-through terminals for the next speaker
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet provides protection for connections
• Off-white textured finish easily painted to match theme decor
• Attractive, contemporary, sturdy steel grille assembly with fine perforations
• Listed to UL Standard 60065 for US and Canada
• Independently tested and meets requirements of UL-2043 (report available)
• Accessory tile bridge support ring (Model TBCR, sold separately)
• Accessory 10-foot long cable kit (Model CK10, sold separately)

• Wide-dispersion coaxial driver for broad, even coverage
• Good off-axis response with smooth contouring
• Computer-matched venting system for full bass output
• Low-profile housing allows greater range of installations
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• Power taps (in watts): 32, 16, 8, 4, 2, and 1 for 70V; 32, 16, 8, 4, and 2 for 100V
• 16-ohm input for non-transformer, multi-speaker systems (selectable via tap selector switch)
• Compounded rubber surround, plus polypropylene and polycarbonate drivers for lasting performance
• Easy wiring with plug-in connector
• Integral swing-out clamps for easy installation
• Connector provides loop-through terminals for the next speaker
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet provides protection for connections
• Attractive, contemporary, sturdy steel grille assembly with fine perforations
• Listed to UL Standard 60065 for US and Canada
• Independently tested and meets requirements of UL-2043 (report available)
• Accessory tile bridge support ring (Model TBCR, sold separately)
• Accessory 10-foot long cable kit (Model CK10, sold separately)

• Wide-dispersion coaxial driver for broad, even coverage
• Good off-axis response with smooth contouring
• Computer-matched venting system for full bass output
• Low-profile housing allows greater range of installations
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• Power taps (in watts): 32, 16, 8, 4, 2, and 1 for 70V; 32, 16, 8, 4, and 2 for 100V
• 16-ohm input for non-transformer, multi-speaker systems (selectable via tap selector switch)
• Compounded rubber surround, plus polypropylene and polycarbonate drivers for lasting performance
• Easy wiring with plug-in connector
• Integral swing-out clamps for easy installation
• Connector provides loop-through terminals for the next speaker
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet provides protection for connections
• Attractive, contemporary, sturdy steel grille assembly with fine perforations
• Listed to UL Standard 60065 for US and Canada
• Independently tested and meets requirements of UL-2043 (report available)
• Accessory tile bridge support ring (Model TBCR, sold separately)
• Accessory 10-foot long cable kit (Model CK10, sold separately)

• Wide-dispersion coaxial driver for broad, even 140° coverage
• Stable, high definition metal-alloy cone
• MDT™ cone design delivers detailed sound
• MLS™ eliminates conventional centering "spider" for more accurate voice coil centering
• High-efficiency drivers deliver superior performance
• Extremely good off-axis response
• Computer-matched venting system for full bass output
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• 16-ohm input for non-transformer multi-speaker systems
• Easy wiring with snap-on connector
• Connector provides loop-through to next speaker
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet provides protection for connections
• Low-resonance cabinet structure
• Off-white textured finish; easily painted to match theme decors
• Listed to UL Standard 60065 for US and Canada
• Independently tested and meets requirements of UL-2043 (report available)
• Attractive, contemporary, sturdy steel grille assembly with fine perforation(s)
• Accessory tile bridge support ring (Model TBCR sold separately)
• Accessory 10-foot long cable kit (Model CK10 sold separately)

• All-in-one unit, pre-assembled with a back can and mounted transformer
• Features a quick flip 70 or 25 Volt selector switch and an easy select transformer wattage dial featuring the choice of 8 individual wattage tap settings covering your complete range of needs
• Flame-retardant, ABS unit also comes with insulated wires, has an attached metal safety loop and easy mount tabs for securing the unit
• Ideal all purpose, value sound solution covering a wide range of applications in commercial sound
• With a furnished 8 ohm tap selector, the speaker can be kept readily on hand to meet all your unexpected sound installation needs

• Wide-dispersion coaxial driver for broad, even 140° coverage
• Stable, high definition metal-alloy cone
• MDT™ cone design delivers detailed sound
• MLS™ eliminates conventional centering "spider" for more accurate voice coil centering
• High-efficiency drivers deliver superior performance
• Extremely good off-axis response
• Computer-matched venting system for full bass output
• High power handling capability for foreground sound
• Selectable power taps via front-mounted control
• 16-ohm input for non-transformer multi-speaker systems
• Easy wiring with snap-on connector
• Connector provides loop-through to next speaker
• Attachment point for seismic cable (safety cable)
• Input terminal cover with knockouts and safety eyelet provides protection for connections
• Low-resonance cabinet structure
• Off-white textured finish; easily painted to match theme decors
• Listed to UL Standard 60065 for US and Canada
• Independently tested and meets requirements of UL-2043 (report available)
• Attractive, contemporary, sturdy steel grille assembly with fine perforation(s)
• Accessory tile bridge support ring (Model TBCR sold separately)
• Accessory 10-foot long cable kit (Model CK10 sold separately)

• All-in-one unit, pre-assembled with a back can and mounted transformer
• Features a quick flip 70 or 25 Volt selector switch and an easy select transformer wattage dial featuring the choice of 9 individual wattage tap settings covering your complete range of needs
• Flame-retardant, ABS unit also comes with insulated wires, has an attached metal safety loop and easy mount tabs for securing the unit
• Ideal all purpose, value sound solution covering a wide range of applications in commercial sound
• Furnished 8 ohm tap selector, the speaker can be kept readily on hand to meet all your unexpected sound installation needs

• Magnetic baffle for easy installation - includes both black and white colored grilles
• Transformer settings of 32W, 16W, 8W, 4W, 2W, 1W and 8 Ohms
• Safety loop built into back panel
• 11.26" Dia x 7.25" Depth
• Hole cutout: 10.44" Dia
• Sold individually