• Junction box for O2B2

• Adaptor plate used to connect the CVCJBD, INTWM or INTPM to the O2MD1, O2MD2, O5MDP1, O2B5 & OiMD1

• 100Mbit each port
• 9th port is 100Mbps uplink
• Backbound Bandwidth: 1.8 Gbps
• IEEE802.3at Standard
• Size: 280*180*44mm
• Built-in Power adapter150W

• 100Mbit each port
• Backbound Bandwidth: 3.6 Gbps
• Uplink port and SFP both Gigabit
• IEEE802.3 at Standard
• Select uplink/SFP
• Size: 440*180*44mm
• Built-in Power adapter�F250W
• 1 U

• 100Mbit each PoE port
• 2 Gigabit uplink ports
• 2 Gigabit fiber optical ports
• IEEE802.3 at standard
• Power transmission distance 100m
• Size: 440*350*45mm
• Total power: 400W

• 100Mbit each PoE port
• 2 Gigabit uplink ports
• 2 Gigabit fiber optical ports
• IEEE802.3 af standard
• Power transmission distance 100m
• Size: 440*350*45mm
• Total power: 400W

• Used in conjunction with Ethernet switch to power PoE cameras
• Meets IEEE 802.3af/at Ethernet standard
• Ethernet speeds up to 10/100/1000MBPS
• 2 year warranty

• Converts HD-TVI video up to 2MP and analog video to IP @ 30fps
• Built-in standard POE (IEEE802.3af)
• H.265/H.264/MJPEG compression supported
• Micro SD card slot for edge storage
• DC 12v output for powering cameras
• 2-way audio communication
• Sensor input and relay output
• Conformant with ONVIF profile S
• 5 year warranty

• Gigabit performance on all ports (uplink and downlink)
• PoE watchdog mode: PoE will continuously monitor for lost device connections and reset the port when detected
• VLAN Mode: When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router
• The VLAN function helps avoid broadcast storms and ARP spoofing
• Surge Protection: Each port is equipped with a surge absorber, which can survive under 6,000V air ESD
• Port 1 supports 802.3bt 60W and all ports support 802.3at/802.3af
• All ports can be extended up to 800’ (250M) @ 10MBPs using high quality CAT6 cable

• VLAN Mode:
     When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router.
     The VLAN Function helps avoid broadcast storms and ARP spoofing.
• Surge Protection: Each port is equipped with a surge absorber which can survive under 10,000V/150A, nanosecond response time, matches with TVS diode to limit voltage spikes and eliminates surges to protect the device
• PoE supplies power through the IEEE802.3af standard, with maximum 0.65A and overcurrent protection
• Easy to install with an attached bracket
• Compact design with waterproof features
• Power supply included

• Extends both power and data 330' per repeater
• Purchase a second repeater for total run of 1000'
• No external power required
• Compatible with the 802.3af standard
• Supports gigabit network speeds
• Built-in LED status indicator
• Plug and play for easy installation

• Converts Speco IP cameras to WiFi
• Dual-band WiFi (2T2R 802.11n)
• Easy setup through mobile app – no need 
  to log into the camera 
  through a web viewer to connect it to 
  an access point
• PoE for providing power to the camera
• Works with Speco Connect
• 2 year warranty

• Send data and power over RG59 coaxial cable up to 1600'
• Extend the normal 330' range of PoE to up to 1300' via Cat5 cable.
• Includes a transmitter (IPC and receiver (SV)

• Power non-PoE IP cameras via a PoE signal by splitting the signal into Ethernet and power
• Can handle up to 20W 802.3at PoE power
• Ethernet speed up to 10/100MBPS
• 2 year warranty

• VLAN Mode:
     When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router.
     The VLAN Function helps avoid broadcast storms and ARP spoofing.
• Surge Protection: Each port is equipped with a surge absorber which can survive under 10,000V/150A, nanosecond response time, matches with TVS diode to limit voltage spikes and eliminates surges to protect the device
• PoE supplies power through the IEEE802.3af standard, with maximum 0.65A and overcurrent protection
• Easy to install with an attached bracket
• Compact design with waterproof features
• Power supply included

• Gigabit performance on all ports (uplink and downlink)
• PoE watchdog mode: PoE will continuously monitor for lost device connections and reset the port when detected
• VLAN Mode: When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router
• The VLAN function helps avoid broadcast storms and ARP spoofing
• Surge Protection: Each port is equipped with a surge absorber, which can survive under 6,000V air ESD
• Port 1 supports 802.3bt 60W and all ports support 802.3at/802.3af
• All ports can be extended up to 800’ (250M) @ 10MBPs using high quality CAT6 cable

• Layer-2 managed switch (supporting PoE function)
• 32 x 10/100/1000Mbps adaptive RJ45 ports and 4 x SFP Gigabit optical ports. Two SFP to RJ45 adapters included
• Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions
• Ports 1-32 support Power over Ethernet and follows the IEEE802.3af/at standard
• Can automatically detect and identify a power-receiving device and supply power to it through a network cable
• Uses store-and-forward mode, combined with QoS technology, to ensure that the bandwidth is effectively allocated to each port
• Provides stable and reliable power and data transmission for high-power AP, network cameras, PTZ network dome cameras, PoE lighting and other security monitoring equipment

• VLAN mode to isolate ports
• Extend mode for port 17-24 to extend signal up to 820’
• Support for IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab, IEEE802.3z
• Compatible with IEEE802.3at (30W) and IEEE802.3af (15.4w)
• Supports port lightning protection Surge: common mode 2KV, differential mode 1KV; static ESD: air 15KV, contact 8KV