• 7 selectable on board EDID modes plus learning feature to ensure optimal display requirements are met
• High Speed HDMI - Deep Color & full 3D support
• Extends the transmission up to 130ft (40m) from an HDMI source at Full HD 1080p
•Pure uncompressed 7.1ch digital audio preserved over HDMI to Cat.5/5e/6/7 cable transmission
• DTS-HD and Dolby TrueHD high bit rate audio support
• HDCP Compliant
• Adjustable 8-level equalization control compensation to optimize signal transmission when longer HDMI cables are necessary
•Allows cascading Wall mounting housing design for easy and robust installation
• Includes: 1x AT-HD4-SI40SR kit (Transmitting and Receiving Modules), 2x 5V Power Supply (removable A/C plug and locking style pin connector), 1x User’s Manual

• Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable
• Bi-directional IR system allowing for control of source or display (IR accessories included)
• Features EDID management which supports default HDMI EDID and has the ability to learn the EDID of display equipment
• Features ARC for two way communication between ARC equipped display and ARC equipped A/V receiver
• Features coaxial break out to extract audio
• Allows for cascading or connecting a local display via additional HDMI loop out port
• Transmission Range: Extends 1080p resolution up to 164ft/50m over a single Cat5e or Cat6 cable
• Works with HDMI and HDCP compliant devices
• Supports up to 1080p High Definition resolution
• Compact design for an easy and flexible installation

Package Contents: (1) 280592 [TX & RX], (2) IR Blaster (TX), (2) IR Receiver (RX), (2) DC 5V in line power supply, (1) Rack-mounting ear set, (1) User Manual

• Allows HDMI Audio/Video signals to be transmitted over a single Cat5e/6 cable
• Transmission Range: Extends 1080p resolution up to 164ft/50m over a single Cat5e or Cat6 cable
• Wideband Bi-directional IR system allowing for control of source or display (IR accessories included)
• Wideband IR signal from 20KHz to 60KHz
• Features EDID management which supports default HDMI EDID and has the ability to learn the EDID of display equipment
• Features EQ distance adjustment switch for perfect transmission and reception of HDMI signals
• Pure unaltered uncompressed 7.1ch digital HDMI over a single Cat5e/6 cable transmission
• Supports DTS-HD and Dolby TrueHD high bit rate audio
• Works with HDMI and HDCP compliant devices
• Supports up to 1080p High Definition resolution
• Compact design for an easy and flexible installation
• Power Supply: 5V DC
• Dimensions: 1.9" (49mm) W x 1" (25mm) H x 3.2" (80mm) D

Package Contents: (1) 280591 [TX & RX] (1) IR Blaster (TX) (1) IR Receiver (RX) (2) DC 5V in line power supply (1) User Manual

• Allows HDMI Audio/Video and IR signals to be transmitted over a single coax cable
• Wideband IR system that allows for controlling the source at the display location (1 IR RX and 1 IR TX included)
• Transmission Range: Extends 1080p resolution up to 100m/328ft over a single RG6 Coax cable; Extends 1080p resolution up to 60m/196ft over a single RG59 Coax cable
• Works with HDMI and HDCP compliant devices
• Supports up to 1080p High Definition resolution
• Compact design for an easy and flexible installation
• Power Supply: DC 5V
• Dimensions: 3.2" W x .98" H x 1.6" D

Package Contents: (1) 280567 [TX & RX] (1) IR Blaster (TX) (1) IR Receiver (RX) (2) DC 5V in line power supply (1) Rack-mounting ear set or adhesive for mounting (1) User Manual

• Allows HDMI audio/video and control to be transmitted up to 164 ft/ 50m using a single Cat5e or Cat6 cable
• Features HDMI Loop-out port on the transmitter to split of cascade audio and video signals for additional displays
• IR pass-through control from the receiver to the transmitter with the provided IR cables
• Full HD support of 1080p @60Hz
• Compatible with Dolby, DTS and PCM audio formats
• EQ settings on the receiver allows for easy adjustment based on cabeling distance
• EDID settings on the transmitter allow for EDID to be managed through either the HDMi Loop-out of the HDMI output of the receiver for an easy and cost effective solution
• HDCP Compliant
• Power supplies: (2) 5V DC
• Dimensions: 3.3" W x .6" H x 2.6" D

• Allows for transmission of HDMI audio and video, control, and power over a single Cat5e/Cat6 Cable up to 230ft/70meters (4K up to 130ft/40m) to a compatible display
• POE functionality allows for either the transmitter (TX) or receiver (RX) to be powered by a single power supply
• Power consumption is less than 10W using the provided 24V power supply
• Supports resolutions up to 4K x 2K@60Hz, 4:2:0 up to 130ft/40m
• Full HD support of 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit up to 230ft/70m
• Dolby, DTS, PCM multichannel and stereo audio formats
• Ultra slim design
• Supports bidirectional IR and RS232 to control either the source or sink (display) from the opposite side the equipment
• HDCP 2.2 Compliant
• Transfer Bidirectional IR and RS232 control
• Power Supply: DC 24V 1A
• Dimensions: 3.9" W x .9" H x 2.6"

• Allows HDMI Audio/Video and IR signals to be transmitted over a single Cat5e/6 cable
• Transmission Range: Extends 1080p resolution up to 196ft/60m over a single Cat5e or Cat6 cable
• IR system allows for control of source at display location (IR accessories included)
• Auto EQ distance for perfect transmission and reception of HDMI signals by just a push of a button
• Works with HDMI and HDCP compliant devices
• Supports up to 1080p High Definition resolution
• Power Supply: (2) 5V DC
• Dimensions: 1.875" W x 1" H x 3.25" D

• Features the latest HDBaseT Technology, optimized for whole-home or commercial distribution of high definition signals at much greater distances of standard HDMI cables
• Transmission Range: Extends 4K@60Hz, 4:4:4 with HDR up to 164ft/50m over a single Cat5e/6 cable and 1080p@60Hz up to 230ft/70m
• Features Power over Cable technology (PoC) which transmits power over Cat5e/6, allowing for either Transmitter or Receiver to be powered without the use of a power supply
• Virtually Lossless Compression retains high end audio and video quality
• Bi-directional IR control
• Features Auto EDID and EQ Management for plug and play installation
• HDR Compatible
• HDCP 2.2 compliant and backward compatible to previous versions
• CEC Support
• Slim and compact design
• Power Supply: DC 12V, 2A
• Dimensions: 5.75" W x .7" H x 3.7" D

• Allows HDMI audio/video signals to be transmitted using a single Cat5e or Cat6 Cable
• Transmission Range: Extends 4K@60Hz, 4:4:4 Chroma up to 164ft/50m and 4K@30Hz, 4:4:4 Chroma and HDR up to 130ft/40m over a single Cat5e/6 cable
• Features Power over Ethernet (PoE) Technology which transmits power over Cat5e/Cat6, allowing the transmitter and receiver to be powered off of a single power supply
• Wideband Bi-directional IR system allowing for control of source or display (IR accessories included)
• Wideband IR signal from 20KHz to 60KHz
• Features Auto EDID and EQ Management for plug and play installation
• HDR10 Compatible
• Works with HDMI and HDCP compliant devices
• HDCP 2.2 compliant
• Slim and compact design
• Pure uncompressed 7.1ch digital audio
• Supports DTS-HD and Dolby TrueHD high bit rate audio

• Extends HDMI signals wirelessly up to 164ft/50m
• Supports up to 1080p@60Hz HD video and audio
• IR pass-through to control source from display location wirelessly
• No line of sight installation required, wireless signal can pass through most obstacles
• HDMI 1.3, HDCP 1.4 and DVI 1.0 compliant
• Supports LPCM 2.0ch 32KHz/44.1KHz/48KHz Audio Formats
• Utilizes H.265 high performance codec technology
• Low latency with less than 120ms
• Compact design for easy and flexible installation behind a display
• Dimensions: 3” W x 3.8” D x 0.8” H

• Transmits audio and video via HDMI as well as complete KVM (Keyboard- Video- Mouse) functionality via USB 2.0 ports over a single Cat5e/6 up to 164ft/50m with POE
• Power Over Ethernet (PoE)- integrates power into the Cat5e/6 cable- requiring no power supply for either the Transmitting unit or Receiving unit (opposite of unit that is plugged in to power)
• Auto EDID management automatically adjusts to overcome compatibility issues
• Auto EQ distance for perfect transmission and reception of HDMI signals
• Supports up to 1920×1080 @ 60Hz resolutions
• Transmission Range: Extends HDMI signals up to 164ft/50m over a single Cat5e or Cat6 cable
• Extends USB 2.0 high speed at 480Mbps to 164ft/50m
• RX unit provides 4 USB 2.0 high speed ports at display end
• USB ports allow for charging of connected USB devices (please use properly certified and licensed cabling with utilizing the charging feature)
• RX integrated with Hi-Fi USB audio card- supports analog passive earphone and microphone access
• VESA DDC and hot swap technology (HPD)
• Compatible HDMI 1.3/DVI 1.0
• HDCP 1.4
• Dimensions: 3.25" W x .8" H x 3.6" D