• Allows composite video output to play on a VGA monitor (CRT or LCD)
• Dual output: BNC x 1 for TV monitor and DB15 x 1 for VGA monitor
• High resolution VGA display up to 1280 x 1024 @60Hz
• Frequency output: 69Hz to 85Hz
• On screen display function: Hue, Brightness, Contrast, Saturation
• Compact size and low working temperature

• Transmit or Receive real-time color or B&W video signal
• Color video up to 1300ft (400m) in pairs via UTP Cat5e/6
• Power signal up to 750ft (250m) in pairs; 12V/24V, DC/AC
• Transmit PTZ data signal up to 1000ft (300m) in pairs
• No power required
• Built-in TVS for surge protection
• Exceptional interference rejection

• 8CH Video Receiver (Active)
• Frequency Response Range: DC-6MHz; Common-Mode / Differential-Mode rejection: 15KHz-6MHz 60dB type
• Wire Type: 24AWG UTP CAT5 or higher; DC loop resistance ≦18Ω/ 100m; Differential capacitance: 62pF/m (max)
• Impedance: UTP or Connection or RJ-45: 100Ω; BNC Coax:75Ω
• Power: AC100-240V 50/60Hz

• 8CH Video Transceiver (Passive)
• Video: Frequency Response Range: DC-6MHz; Common-Mode / Differential-Mode rejection: 15KHz-6MHz 60dB type
• Wire Type: 24AWG UTP CAT5 or higher; DC loop resistance ≦18Ω/ 100m; Differential capacitance: 62pF/m (max)
• Impedance: UTP or Connection or RJ-45: 100Ω; BNC Coax:75Ω
• Power: n/a
• Transient Protection: n/a

• 16CH Video Receiver (Active)
• Video: Frequency Response Range: DC-6MHz; Common-Mode/Differential-Mode rejection: 15KHz-6MHz 60dB type
• Wire Type: 24AWG UTP CAT5 or higher; DC loop resistance ≦18Ω/ 100m; Differential capacitance: 62pF/m (max)
• Impedance: UTP or Connection or RJ-45: 100Ω; BNC Coax:75Ω
• Power: AC100-240V 50/60Hz
• Transient Protection: 6KV 10 x 700 us IEC61000-4-5

• 16CH Video Transceiver (Passive)
• Video: Frequency Response Range: DC-6MHz; Common-Mode/Differential-Mode rejection: 15KHz-6MHz 60dB type
• Wire Type: 24AWG UTP CAT5 or higher; DC loop resistance ≦18Ω/ 100m; Differential capacitance: 62pF/m (max)
• Impedance: UTP or Connection or RJ-45: 100Ω; BNC Coax:75Ω
• Power: n/a
• Transient Protection: n/a

RJ-45 Interface
• 8-Port 10/100Mbps Fast Ethernet Switch
• 8-Port supports 48V DC power to PoE Powered Device
• 1-Port 10/100/1000Mbps Gigabit Ethernet Switch
Power over Ethernet
• Complies with IEEE 802.3af Power over Ethernet End-Span PSE
• Up to 8 IEEE 802.3af devices powered
• Supports PoE Power up to 15.4 watts for each PoE port
• 130-watt PoE budget
• Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
Switching
• Hardware based 10/100Mbps auto-negotiation and auto MDI/MDI-X (Port 1 to Port 8)
• Hardware based 10/100/1000Mbps auto-negotiation and Auto MDI/MDI-X (Port 9)
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 4K absolute MAC addresses
• Automatic address learning and address aging
Hardware
• 12-inch desktop size, 1U height
• LED indicators for system power, per port PoE ready and PoE activity, speed, Link / Act
• 1 silent FAN to provide stable and efficient power performance

Interface
• 16-Port 10/100/1000Mbps Gigabit Ethernet RJ-45 ports
• Each port supports 52V DC power to PoE Powered Device
Power over Ethernet
• Complies with IEEE 802.3af / IEEE 802.3at Power over Ethernet
• Up to 16 IEEE 802.3af / IEEE 802.3at devices powered
• Supports PoE Power up to 30 Watts for each PoE port
• Auto detect powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100m
Switching
• Hardware based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
• Flow control for full duplex operation and back pressure for half duplex operation
• Integrates address look-up engine, supporting 8K absolute MAC addresses
• 9K Jumbo Frame supports at all speed (10/100/1000Mbps)
• Automatic address learning and address aging
• Supports Pre-Energy-Efficient Ethernet (EEE) function (IEEE 802.3az)
Hardware
• 19-inch desktop size, 1U height
• LED indicators for PoE ready and PoE activity
• Ethernet Link Energy-Saving technology
   - Link down power saving
   - Intelligent scales power based on cable length

• 48 powerful infrared LEDs
• Indoor/outdoor infrared illuminator ideal for low-light or near total darkness applications • Offers a 40’ range and 30° horizontal / vertical dispersion angle
• Illuminator is housed in heavy-duty aluminum
• IR200 includes a 110VAC power cord
• Mounting bracket included with both versions
• Weather resistant operation
• IP67 compliant
• 1 year warranty

• 48 powerful infrared LEDs
• Indoor/outdoor infrared illuminator ideal for low-light or near total darkness applications
• Offers a 40’ range and 30° horizontal / vertical dispersion angle
• Illuminator is housed in heavy-duty aluminum
• IR20024 does not include power cord
• Mounting bracket included with both versions
• Weather resistant operation
• IP67 compliant
• 1 year warranty

• BNC (male) to screw terminal for easy connection
• Compact size. Multiple units could be mounted behind multiplexer, quad, DVR, etc.
• Sold in packs of 10
• 2 year warranty

• BNC (male) with pigtail end
• Compact size. Multiple units could be mounted behind multiplexer, quad, DVR, etc.
• 2 year warranty

• Power Cord Lead
• 12VDC
• 6" Length

• Power Cord Lead
• 12VDC
• 6" Length

• Operating Voltage- 5V DC as supplied by USB port
• Pick-Up Voltage- 3.75V DC
• Operating Current- 28.1mA (140mW)
• Dimensions - 3" (W) x 0.9" (H) x 0.9" (D)
• Wire Length- 5.9"

• Connects VGA output to existing TV or CRT monitor
• Resolutions supported: 640 x 480, 800 x 600, 1024 x 768
• Dual output ports: Composite Video(BNC), VGA(DB15)
• On-screen display background
• Simple and quick to install
• Windows and Mac compatible

• Operate 12 Volt DC Cameras on a Variety of Voltages
• Regulated 12 Volt DC output @ 500 mA
• Accepts 20 to 28 Volts AC and Converts it to 12 Volts DC
• Accepts 15 to 30 Volts DC and Converts it to 12 Volts DC
• Voltage Input via 2-pin terminal block
• 12 Volt DC Output via DC plug
• Dimensions: Mechanical Converter - 2.5"� x 1.1"� x 1"�
• Input and Output Cables - 5.9" each
• RoHS compliant

• 4 video input, 4 video output
• 10dB video gain compensation, amplification and HF compensation
• Sharpness and brightness adjustment
• Transmission range: 3200 ft(RG59U cable)

• 1 Video input to 1 video output
• 10dB gain compensation, amplification & HF compensation
• Sharpness & brightness adjustment works perfectly with DVR's
• Transmission range of 3200 ft (RG59U coaxial cable)

• 1 video input (BNC) to 4 video outputs (BNC)
• Power: 12VDC (power supply included)
• Operates with color or BW signals

• BNC male to BNC female with mini cable 11.8"
• Gives DVR immunity from interference
• Built-in highly balanced mode of video transmission which is immune to interference from sources of noise: data signals, other video signals, nearby power, ringing telephones, fluorescent lights, transformers and more
• Perfect for long cable runs or weak / strong signals

• 60° field of illumination
• IR range up 180 ft. in near total darkness and depending on scene reflection
• 55 powerful infrared LEDs
• Compatible with any BW or IR sensitive color CCD camera
• CDS sensor activates IR LEDs only as needed
• Low power consumption
• Dual Voltage
• Weather resistant operation
• IP66 compliant
• 1 year warranty

• 4 x BNC female to 1 x RJ45 female + 8 pin terminal block
• Four passive transceivers in one product
• Choice of RJ45 or push pin terminal inputs/outputs
• Dimensions: 3.2" x 3.2" x 1.1"

• Passive HD Transceiver: Video + Power
• Compatible with HDCVI / HDTVI / AHD
• Transmission Distance: 720P up to 1,312ft (400m) / 1080P up to 820ft (250m)
•Plug and Play
• Anti-Interference
• Super Lightning Protection
• ESD Protection
• ABS Outer Shell
• Power Supply: 12V DC / 24V AC
• Sold in pairs

• Send HD-TVI signal up to 656' (200M) over UTP cable
• BNC male to screw terminal for easy connection
• Compact size allows mounting of multiple units behind multiplexers, Quads, DVRs, etc.
• Passive, No power required
• Ideal for retrofits using existing UTP cable
• Built in ESD, EFT (impulse noise), lightning (surge) and transient protection
• Sold individually but used in pairs
• Could be used in conjunction with another TVIUTP, or with the pigtail model TVIUTPPT.

• Send HD-TVI signal up to 656' (200M) over UTP cable
• BNC male to screw terminal with 4" (10cm) mini coax cable for easy connection
• Compact size allows mounting of multiple units behind multiplexers, Quads, DVRs, etc.
• Passive, No power required
• Ideal for retrofits using existing UTP cable
• Built in ESD, EFT (impulse noise), lightning (surge) and transient protection
• Sold individually but used in pairs
• Could be used in conjunction with another TVIUTPPT, or with the non-pigtail model TVIUTP

• VLAN Mode:
     When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router.
     The VLAN Function helps avoid broadcast storms and ARP spoofing.
• Surge Protection: Each port is equipped with a surge absorber which can survive under 10,000V/150A, nanosecond response time, matches with TVS diode to limit voltage spikes and eliminates surges to protect the device
• PoE supplies power through the IEEE802.3af standard, with maximum 0.65A and overcurrent protection
• Easy to install with an attached bracket
• Compact design with waterproof features
• Power supply included

• Extends both power and data 330' per repeater
• Purchase a second repeater for total run of 1000'
• No external power required
• Compatible with the 802.3af standard
• Supports gigabit network speeds
• Built-in LED status indicator
• Plug and play for easy installation

• Converts Speco IP cameras to WiFi
• Dual-band WiFi (2T2R 802.11n)
• Easy setup through mobile app – no need 
  to log into the camera 
  through a web viewer to connect it to 
  an access point
• PoE for providing power to the camera
• Works with Speco Connect
• 2 year warranty

• Send data and power over RG59 coaxial cable up to 1600'
• Extend the normal 330' range of PoE to up to 1300' via Cat5 cable.
• Includes a transmitter (IPC and receiver (SV)

• 16 Alarm Inputs
• Interface with Speco DVR/NVR’s via RS-485
• Power: 12VDC 
• Dimensions: 6.7" (W) x 1.0" (H) x 1.9" (D)
• Front LED’s: Power (Red), Alarm (Yellow), RS-485 (Green)

• Adjusts to Fit 1/4" to 1" Thick Wallboard- Paneling- or Drywall
• UL and CSA Listed

• Power non-PoE IP cameras via a PoE signal by splitting the signal into Ethernet and power
• Can handle up to 20W 802.3at PoE power
• Ethernet speed up to 10/100MBPS
• 2 year warranty

• VLAN Mode:
     When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router.
     The VLAN Function helps avoid broadcast storms and ARP spoofing.
• Surge Protection: Each port is equipped with a surge absorber which can survive under 10,000V/150A, nanosecond response time, matches with TVS diode to limit voltage spikes and eliminates surges to protect the device
• PoE supplies power through the IEEE802.3af standard, with maximum 0.65A and overcurrent protection
• Easy to install with an attached bracket
• Compact design with waterproof features
• Power supply included

• Gigabit performance on all ports (uplink and downlink)
• PoE watchdog mode: PoE will continuously monitor for lost device connections and reset the port when detected
• VLAN Mode: When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router
• The VLAN function helps avoid broadcast storms and ARP spoofing
• Surge Protection: Each port is equipped with a surge absorber, which can survive under 6,000V air ESD
• Port 1 supports 802.3bt 60W and all ports support 802.3at/802.3af
• All ports can be extended up to 800’ (250M) @ 10MBPs using high quality CAT6 cable

• Converts VGA & analog stereo or digital audio (SPDIF) to HDMI
• Supports HDMI & DVI output mode (HDMI to DVI cable not included)
• Encodes analog stereo audio or digital audio onto the video signal for HDMI combined audio and video
• Built-in auto selection of analog or digital audio
• Supports PC resolution up to 1920×1200

• Layer-2 managed switch (supporting PoE function)
• 32 x 10/100/1000Mbps adaptive RJ45 ports and 4 x SFP Gigabit optical ports. Two SFP to RJ45 adapters included
• Each RJ45 port supports MDI/MDIX auto flip and wire-speed forwarding functions
• Ports 1-32 support Power over Ethernet and follows the IEEE802.3af/at standard
• Can automatically detect and identify a power-receiving device and supply power to it through a network cable
• Uses store-and-forward mode, combined with QoS technology, to ensure that the bandwidth is effectively allocated to each port
• Provides stable and reliable power and data transmission for high-power AP, network cameras, PTZ network dome cameras, PoE lighting and other security monitoring equipment

• Allows USB Signals to be transmitted using one Cat 5e or Cat 6 cable
• Extends the Distance of a USB Device from a USB-Compatible Computer
• Ideal for Use with USB Printers- Digital Cameras- Keyboard/Mouse Extensions and Any Other USB Devices
• Passive- No Power Supply Required
• Transmission Range: Extends up to 40 meters (132 ft)
• Data Speed Transfer: USB 1.0
• Transmitter Connection: USB A Male- RJ45
• Receiver Connection: USB A Female- RJ45
• Dimensions: 1.5" W x 1.125" H x 2.625" D

• Allows USB 2.0 signals to be transmitted over a single Cat5e/6 cable
• Provides additional power to multiple USB 2.0 compatible devices
• Extends distance of up to (4 qty) USB 2.0 devices from a single USB device
• Transfer speeds of up to 480Mbps
• Ideal for use with USB 2.0 keyboard and mouse devices
• Transmission Range: Extends up to 197ft/60m
• Transmitter Connection: USB A Male – RJ45
• Receiver Connection: USB A Female – RJ45
• 5V Power Supply Included
• Dimensions: 1"H X 2" x 2.375"D, TX: 6" USB Dongle

• VLAN mode to isolate ports
• Extend mode for port 17-24 to extend signal up to 820’
• Support for IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3ab, IEEE802.3z
• Compatible with IEEE802.3at (30W) and IEEE802.3af (15.4w)
• Supports port lightning protection Surge: common mode 2KV, differential mode 1KV; static ESD: air 15KV, contact 8KV

• Send HD-TVI signal up to 656' (200M) over UTP cable
• BNC male to screw terminal for easy connection
• Compact size allows mounting of multiple units behind multiplexers, Quads, DVRs, etc.
• Passive, No power required
• Ideal for retrofits using existing UTP cable
• Built in ESD, EFT (impulse noise), lightning (surge) and transient protection
• Sold individually but used in pairs
• Could be used in conjunction with another TVIUTP, or with the pigtail model TVIUTPPT.

• Supports up to 5MP HD-TVI
• Supports HD-TVI, AHD, HD-CVI video formats
• HD-TVI Signal extension up to 984’ (300M)
• Frequency and brightness adjustable

IMPORTANT: The TVIGL does not support UTC function. Please make any adjustments between camera and recorder prior to installation of the TVIGL. UTC commands WILL NOT work after this has been installed.

• Prevents video-signal distortion caused by video ground loops
• Prevents power cables from interfering with the HD camera signal
• Eliminates picture tearing, cross-talk and rolling
• Passive, no power required
• Supports resolutions up to 4K
• Maximum distance: 656’ (200M)

• Digital and non-compression coding technology
• Supports HD-TVI/AHD/HD-CVI/CVBS and RS485 data signal over fiber optical cable
• Single signal mode: 12.42 miles (20KM), Multiple signal mode: 1.24 miles (2KM)
• Supports resolutions up to 2MP: 720p/25, 30, 50, 60Hz; 1080p/25, 30Hz.
• Built-in LED indicators

• Converts HD-TVI/AHD/HDCVI/NTSC/PAL/960H signals to HDMI, VGA or Composite Video
• Supports: 720p@25/30/50/60, 1080p@25/30Hz
• Built-in loopout
• Built-in LED lights on unit to indicate selction
• OSD displayed on monitor to indicate input/output settings
• Includes 12V power supply

• Compatible with VoIP, SIP devices (IPPBX, IP Phone) via SIP
• IP67 waterproof design is ideal for outdoor installations
• PoE or 12/24VDC
• Compatible with SecureGuard® VMS via ONVIF
• Supports pre-recorded messages, schedules, and alarm trigger using SecureGuard® software
• NDAA Compliant

• Compatible with VoIP, SIP devices (IPPBX, IP Phone) via SIP
• IP67 waterproof design is ideal for outdoor installations
• PoE or 12/24VDC
• Compatible with SecureGuard® VMS via ONVIF
• Supports pre-recorded messages, schedules, and alarm trigger using SecureGuard® software
• NDAA Compliant

• 80° field of illumination
• IR range up 147 ft. in near total darkness and depending on scene reflection
• 55 powerful infrared LEDs
• Compatible with any BW or IR sensitive color CCD camera
• CDS sensor activates IR LEDs only as needed
• Low power consumption
• Dual Voltage
• Weather resistant operation
• IP66 compliant
• 1 year warranty

• Used in conjunction with Ethernet switch to power PoE cameras
• Meets IEEE 802.3af/at Ethernet standard
• Ethernet speeds up to 10/100/1000MBPS
• 2 year warranty

• Adjusts to Fit 1/4" to 1" Thick Wallboard- Paneling- or Drywall
• UL and CSA Listed

• Converts HD-TVI video up to 2MP and analog video to IP @ 30fps
• Built-in standard POE (IEEE802.3af)
• H.265/H.264/MJPEG compression supported
• Micro SD card slot for edge storage
• DC 12v output for powering cameras
• 2-way audio communication
• Sensor input and relay output
• Conformant with ONVIF profile S
• 5 year warranty

• Gigabit performance on all ports (uplink and downlink)
• PoE watchdog mode: PoE will continuously monitor for lost device connections and reset the port when detected
• VLAN Mode: When the VLAN mode is selected, each PoE port is isolated and independently connects with cameras, computers or other switches, while the uplink port connects with a router
• The VLAN function helps avoid broadcast storms and ARP spoofing
• Surge Protection: Each port is equipped with a surge absorber, which can survive under 6,000V air ESD
• Port 1 supports 802.3bt 60W and all ports support 802.3at/802.3af
• All ports can be extended up to 800’ (250M) @ 10MBPs using high quality CAT6 cable

• Send HD-TVI signal up to 656' (200M) over UTP cable
• BNC male to screw terminal for easy connection
• Compact size allows mounting of multiple units behind multiplexers, Quads, DVRs, etc.
• Passive, No power required
• Ideal for retrofits using existing UTP cable
• Built in ESD, EFT (impulse noise), lightning (surge) and transient protection
• Sold individually but used in pairs
• Could be used in conjunction with another TVIUTP, or with the pigtail model TVIUTPPT.

• Compatible with VoIP, SIP devices (IPPBX, IP Phone) via SIP
• PoE or 12/24VDC
• Compatible with SecureGuard® VMS via ONVIF
• Supports pre-recorded messages, schedules, and alarm trigger using SecureGuard® software
• NDAA Compliant

• Works with Speco Audio Manager Software
• Compatible with SecureGuard® VMS via ONVIF
• Supports pre-recorded messages, schedules, and alarm trigger
• IP67 waterproof design is ideal for outdoor installations
• PoE or 12/24VDC
• NDAA Compliant

• Adjusts to Fit 1/4" to 1" Thick Wallboard- Paneling- or Drywall
• UL and CSA Listed

• Adjusts to Fit 1/4" to 1" Thick Wallboard- Paneling- or Drywall
• UL and CSA Listed

• Compatible with VoIP, SIP devices (IPPBX, IP Phone) via SIP
• PoE or 12/24VDC
• Compatible with SecureGuard® VMS via ONVIF
• Supports pre-recorded messages, schedules, and alarm trigger using SecureGuard® software
• Two-way audio support with mic input
• NDAA Compliant