• Two mono channels with Trim, Bass, Treble, Aux Send, Pan, and Level controls; low cut; pre/post; PFL switches; Inserts
• Four stereo channels: two with Level controls, Bass/Treble, Balance controls, Pre/Post Aux Send and PFL switches; two with Level controls and PFL switches
• Tape In RCA jacks with Level control and PFL switch
• Tape Record Out RCA jacks
• Individual channel Aux Send, Pre/Post selectable, and Master control
• L/R main unbalanced outputs with slider control
• Mono output with slider level control and AFL switch
• Dual 6-segment LED display bar graph meters
•Ultra-low noise mic preamps
• Full spectrum frequency response
• Wide dynamic range with superior headroom
• Separate Master Mix, Control Room and Headphone outputs
• Mic and Line balanced inputs for optimum audio integrity
• 1/4" TRS Stereo Control Room and Headphone outputs
• Switchable global +48V phantom power on all mono inputs
• Input Trim control on each mono channel
• Pan pots on each mono channel and Balance pots on each stereo input
• Peak LEDs on mono channels
• High-quality pots for all controls with Pan/Balance and EQ controls having center detents
• High-strength steel casing and superior construction with only highest quality components for longest life and maximum reliability
• External AC supply for optimum signal integrity and superior transient response

• Six mono input channels with balanced XLR Mic and 1/4" TRS line inputs
• Eight stereo input channels with balanced 1/4" TRS jacks for balanced or unbalanced inputs
• Six 1/4" TRS inserts allow independent connection of effects devices for each mono channel
• Ultra low-noise mic preamps
• Wide dynamic range with superior headroom
• Separate Master Mix, Control Room and Headphone outputs
• 3-band EQ on all channels
• Mic and Line balanced inputs for optimum audio integrity
• Tape In and Record Out RCA jacks with Tape inputs assignable to Master Mix or stereo Control Room/Headphone outputs
• Switchable global +48V phantom power on all mono inputs
• Input Trim control on each mono channel
• Pan pots on each mono channel and Balance pots on each stereo input
• Pre and post-fader Aux Sends for external effects and monitoring
• Two multifunction stereo Aux Returns with Aux Return controls
• Switchable Low-Cut filters (18 dB/octave @ 75 Hz) on mono channels
• PFL (Pre-Fader Listen) function on all channels
• 60mm faders on all channels and Master Mix for precise level control
• 1/4" TRS and XLR Stereo Outputs
• Peak LEDs on input channels
• Dual 10-segment LED display bar graph meters
• High-quality sealed pots with center detents
• High-strength steel casing and superior construction with highest quality components for longest life and maximum reliability
• External AC supply for optimum signal integrity and superior transient response

• Two XLR Microphone Inputs (including a paralleled front panel input)
• Individually switchable phantom power
• Four Stereo Source Inputs, Four RCA and one front panel stereo 3.5mm
• 1/4" TRS Mic Insert jack
• Stereo RCA and XLR Outputs
• Headphone output on front panel with volume control

• Defeatable "ducking" "Jukebox mute"
• One active balanced XLR mic input channel
• One active balanced XLR mic and 1/4 inch TRS line input channel
• Three stereo input channels (Six phono connectors)
• One unbalanced stereo output (Two phono connectors)
• One balanced stereo mic/line output (Two 1/4 inch TRS connectors)
• 12V phantom power for condenser microphones
• Half-rack chassis

• Five unbalanced aux level inputs (Phono connectors)
• LED peak output meter
• One unbalanced aux level output (Phono connector)
• IEC power cord connector
• 12V phantom power for condenser microphones
• Built-in low cut filters on mic inputs
• Unit fits into a half-rack space and includes all the necessary rack mounting hardware

• 5-channel mini mixer
• XLR balanced microphone input with volume control
• RCA stereo inputs with volume control
• 1/4" stereo inputs with volume control
• RCA stereo outputs
• 1/4" instrument level output
• 18 Volt AC adapter included

• 4 Channel / 4 zone stereo mixer
• 2 Mic/Stereo Line inputs with ducking
• 2 Stereo CD/Line inputs
• On board Speaker and Headphone monitoring
• Euroblock output connectors
• Remote Volume Control

• With up to 15 simultaneous inputs and ten outputs (including complete USB interface), this versatile desktop mini-mixer is a valuable tool for almost any studio recording, computer, home audio or live performance application
• Two mono channels with balanced Mic and Line Inputs and two stereo channels with Line and RCA Inputs; each channel has Trim, 3-Band EQ, Aux Send, Pan, and Level Controls with Peak indicator LEDs
• USB 1.0 I/O Interface to send or receive digital audio signals to or from any computer
• Stereo mini-jack iPod/MP3 inputs
• Ultra-low noise mic preamps for optimum signal integrity; full spectrum frequency response with wide dynamic range and superior headroom
• Separate Main Mix, Control Room, and Headphone outputs; Stereo Aux; Return inputs with Level control; Tape In/Out RCA connectors plus stereo mini-jack output
• Dual 4-segment LED display bar graph meters
• SMD technology for most compact design
• Miniature 7" x 8" durable steel casing and superior construction for long life and maximum reliability

• Ultra-low noise, high headroom analog mixer
• Four Class A, MDR (Maximum Dynamic Range) mic preamps with 3-band EQ
• Four Stacked-Stereo channels
• High-quality, precision faders
• Two single-knob, studio-quality compressors
• High-integrity, bidirectional USB interface
• 100 24-bit, low-noise digital effects
• One pre-fader Aux Send per channel for monitor mix
• All mic channels equipped with input Gain and high pass filters
• 48V Phantom Power for condenser microphones
• Multiple outputs: Main Mix, Mix 2, Phones and Tape
• USB/Tape inputs assignable to Main Mix or Mix 2/Phones outputs
• Optional mic stand mount available

• Ultra-low noise, high headroom analog mixer
• Six Class A, MDR (Maximum Dynamic Range) mic preamps
• Four stereo channels with multiple input options (1/4" and RCA)
• High-integrity, bidirectional USB interface
• 100 24-bit, low-noise digital effects
• Four TRS inserts for external signal processing
• 3-band active EQ
• High-quality, precision 60mm faders
• Four single-knob, studio-quality compressors
• Pre-fader Aux Send for monitor mix
• Post-fader Aux Send for external effects
• All mic channels equipped with input Gain and high pass filters
• 48V Phantom Power for condenser microphones
• Multiple outputs: Main Mix, Mix 2, Phones and Tape
• XLR and 1/4" Main Mix outputs
• USB/Tape inputs assignable to Main Mix or Mix 2/Phones outputs

• Front panel Headphone Output
• Monitor, effects send and Pan pots on each channel
• Mono Send, Stereo Return effects loop
• Treble and Bass tone controls for each channel
• R & L Master volumes and FX Return master channel
• Standard 19" x 1.75 EIA rack chassis
• External power supply for elimination of transformer noise

• Eight XLR microphone inputs
• Trim controls
• Tone controls (treble/bass cut)
• Individually switchable +48 VDC phantom power
• Eight 1/4" unbalanced inputs, each may be internally jumpered to become an Insert or a Direct Output
• RCA Prefader (pre Master Vol.) Output for recording, monitoring or cascading
• RCA Aux Buss Input for cascading, or as a ninth unbalanced input
• Mic or Line output level

• Two Mic Inputs with Trim Controls
• Four RCA source inputs
• Four Balanced XLR Zone Outputs
• Automatic paging
• Remote Volume for each output

• Two Mic Inputs with independent switchable phantom power
• True 48V phantom power
• Two RCA source inputs and one front panel 3.5mm stereo input
• Four Balanced XLR Zone Outputs
• Remote Volume for each output
• Assignable automatic paging

• Two Mic inputs with available phantom power
• Treble or Bass cut controls for each mic
• Three stereo source inputs
• Bass and Treble controls on source 1 & 2
• Signal muting (ducking) on mic 1 & source 3
• Switchable Mono or Stereo mode on unbalanced outputs
• Uses 12VDC power for easy use in mobile application

• 1 XLR Mic Input with rear panel Trim control, balanced
• 4 individual 1/4" Stereo Inputs
• Balanced 1/4" TRS Outputs
• Balance control on each channel (Pan on the Mic channel)
• Headphone / Auxiliary Outputs
• +12VDC Phantom Power
• External Power Supply included for low noise operation

• For mixing a microphone XLR input with up to three RCA input signals
• Four channels total
• Line / Headphone output level
• ROLLS PS27 AC adapter included
• Stereo RCA Line-Level Output

• Three XLR mic inputs with switchable phantom power and input padding
• Clip LEDs for each Mic input
• Mute jack, contact closure to ground main output mute
• Master Level control
• Remote Volume jack (connects to an optional 100K ohm potentiometer)
• Stereo Record Out
• Priority ducking/talk-over for microphone paging, and jukebox
• Mic Insert jack for adding signal processing to the Mic Inputs
• Four stereo RCA line/consumer level inputs
• Master Bass and Treble controls (sources only)

• 12VDC phantom power
• 100Hz low cut filters
• Balanced XLR output
• Mic or line output level
• 1/8" headphone output
• Compact design

• Four Stereo 1/4" and 1/8" Inputs
• Stereo 1/4" and 1/8" Outputs
• 100K Ohm Potentiometers

• 4 Stereo RCA inputs
• Passive, the unit requires no power

• Mixes three microphones to stereo XLR outputs
• Output level controls for mic or line-level output
• Transformer isolated outputs
• Phantom Power and Low-Cut switches for each Mic input
• Battery and AC powered
• Handy shoulder strap mounts
• Switchable Low Cut filter (100 Hz high pass) for each channel

• 1/8" and RCA line level signals
• Dual RCA Stereo output
• Individual controls for each channel

• 3 - Stereo 1/4" Stereo Inputs
• True stereo 1/4" outputs, unbalanced
• Two Headphone Outs (1/4" and 3.5mm)
• Pan control for each channel

• 9V Battery or AC adapter operation
• 2 Mic Inputs
• +18VDC Phantom Power
• 3.5mm Stereo Output
• 3.5mm Stereo Headphone Output
• Pan control on each channel
• Auxiliary 3.5mm Input
• 3.5mm mic in jack for headset or other mic

• Stereo RCA Input
• XLR Mic Input
• 1/4" Mono Instrument/Line Input
• 1/8" (3.5mm) TRS Stereo Line Input
• Stereo RCA Outputs
• 1/4" TRS balanced Mic/Line Output
• 1/8" TRS Stereo Headphone Out
• 9V Battery operation

• Four stereo inputs to one stereo output
• Stereo RCA and 1/8" TRS Stereo high-impedance inputs
• Stereo RCA and 1/8" TRS Stereo high-impedance output

• Ten channels (eight 1/4" stereo line inputs, two combination XLR-1/4" inputs)
• Balance control for each channel
• Switchable +4 dBu or -10 dBV line input level
• Balanced main stereo XLR and 1/4" line outputs
• Versatile signal routing
• Low noise, discrete microphone pre-amplifiers with 48-volt phantom power
• Two auxiliary sends
• Front-panel headphone and monitor outputs with level controls
• Flexible 6-segment LED meter/headphone source control
• Center detents for all controls for use in low light situations
• Single 19" rackmount metal chassis with internal power supply